Shirt Pocket Discussions  
    Home netTunes launchTunes SuperDuper! Buy Now Support Discussions About Shirt Pocket    

Go Back   Shirt Pocket Discussions > SuperDuper! > General

 
 
Thread Tools Rating: Thread Rating: 5 votes, 5.00 average. Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-20-2006, 02:36 PM
DaleMeyn DaleMeyn is offline
Registered User
 
Join Date: Feb 2006
Location: Stafford county, VA
Posts: 53
SD! & HDD copy speed fun

This is a bit of curioso concerning SD! cloning/updating speeds and HDD data transfer speeds. One would expect that HDD copy speed would strongly influence All Files copying using Erase then Copy, and that conversely, it would have little influence when using Smart Update on an established clone (because nearly all the time is spent evaluating files rather than copying). The data, however, show both are nearly equally influenced by the HDD copy speed.
I have an iMac G5 iSight, OS 10.4.5, with 2 external HDDs. One is a Micronet Fantom 250GB FireWire400 HDD, the other is a Micronet 250GB FireWire400/USB2.0 HDD. Both have identical Acomdata drive mechanisms and Oxford 911 FireWire bridge chipsets. The Fantom HDD has a 2MB buffer, the Micronet has an 8MB buffer.
First, the HDD copy speeds, copying 417.5 MB of digital photos from the internal Mac HD to each external HDD in turn, just for reference:

Fantom FireWire: elapsed timie = 32.9 sec., copy rate = 12.7 MB/sec
Micronet FireWire: elapsed time = 41.05 sec, copy rate = 10.2 MB/sec
Micronet USB2.0: elapsed time = 75.8 sec, copy rate = 5.5 MB/sec

Notice that the Fantom with a 2MB buffer is actually faster than the otherwise identical Micronet with a 8MB buffer in FireWire mode. Anybody know why that would be the case? Also despite advertised speed figures, USB2.0 real-world copy rates are only a little more than half as fast as FireWire400.

Now the SD! performance, cloning from the internal Mac HD to the Micronet HDD:

1. Copy All Files using Erase then Copy:

Micronet FireWire mode: 13.6 GB cloned in 71m39s, cloning rate = 3.23MB/sec.
HDD copy time: 13.6GB copied @ 10.2MB/s, disk time = 22m13s, 31% of total.

Micronet USB mode: 13.5 GB cloned in 103m33s, cloning rate = 2.22MB/sec.
HDD copy time: 13.5GB copied @ 5.5MB/s, disk time = 40m51s, 39% of total.

2. Copy All Files using Smart Update to an existing clone:

Micronet FireWire mode: 13.5GB cloned in 4m28s, cloning rate = 50.4MB/s.
HDD copy time: 48.0MB copied @ 10.2MB/s, disk time = 4.7sec., 1.7% of total.

Micronet USB mode: 13.5GB cloned in 6m18s, cloning rate = 36.8MB/sec.
HDD copy time: 20.4MB copied @ 5.5MB/s, disk time = 3.7sec, 1.0% of total.

Using the USB2.0 mode slows the overall cloning process by about 45% when doing Erase then Copy, and about 36% for Smart Update. In this trial, Smart Update makes negligible use of actual disk transfer time, but even so, the slowdown using USB instead of FireWire is significant, in a relative sense, nearly the same as when doing a complete Erase then Copy operation, where disk transfer time is a large fraction of the total. It would be more meaningful in terms of drive transfer speed per se if one compared 2 drives, both operating in FireWire400, but with different access rates of the drives themselves. FireWire and USB2.0 are different systems, having very different operation overhead requirements. That’s probably why FireWire400 is nearly twice as fast for copying as USB 2.0, despite their similar advertised copy rate figures.
I can recommend the Micronet/Fantom HDDs, they are fast, behave very well under OS 10.4.5, and are pretty cheap. How long they’ll last, I don’t know, but at present they are performing magnificently, with absolutely no mounting/attaching problems or other mysteries. I had another maker’s HDD with the Prolific chipset, it just wouldn’t reliably mount or attach in FireWire mode, had to use it in USB2.0 mode to get it to behave reliably. Evidently OS 10.4.5 is designed to work well with the Oxford 911 (FireWire400) and 922 (FireWire800) chipsets. So when selecting an HDD or separate enclosure, make sure it has one of those.
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Copy Newer? or Copy Different? Kathleen General 12 10-05-2005 01:38 AM
Copy error and crash offdahook84 General 3 10-01-2005 10:10 PM
BackUp hangs at 3% JimK General 10 09-27-2005 09:48 AM
Error: No space left on device tradervic General 11 06-29-2005 04:50 PM
When I try to copy a single directory, I end up copying the whole disk. Why? dnanian Frequently Asked Questions 0 06-22-2004 06:59 PM


All times are GMT -4. The time now is 04:19 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.