command prompt???

[mpw995]

I reran SuperDuper to transfer everything from the old drive to the new. I installed the new drive and when I booted it up, it came up with some sort of a command prompt. In the upper left corner it says:

Apple iMac Open Firmware 3.0.f2 built on 04/23/99 at 14:31;03
Copyright 1994-1999 Apple Computer, Inc.
All Rights Reserved.
ok
0 >

Nothing else displays. no "?" , no Apple logo etc...
What next?

[dnanian]

Try:

reset-nvram
reset-all

(Return after each.) It should reboot after the "reset-all".

[mpw995]

After I typed "reset-nvram", I got this:

DEFAULT CATCH!, code=300 at %SRR0: ff81edd0 %SRR1: 0000b030
ok
0 >

Then I typed "reset-all". When it rebooted, I was back to the command prompt. I am thinking that maybe I should cut my losses and buy a more permanent HDD enclosure and just make the 40Gb an external USB drive???

[dnanian]

Well, it certainly seems like the computer doesn't like the drive at all: perhaps you've mis-installed it? It it set to "cable select"?

[mpw995]

No, It is set as a master. should it be cable select?

[dnanian]

It definitely should for more recent Macs, so I'd give that a try. It might be that the drive isn't compatible with the controller at all... unfortunately, I'm not an expert on early (pre-OS X) Mac hardware.