View Single Post
  #1  
Old 05-25-2009, 01:21 AM
2stepbay 2stepbay is offline
Registered User
 
Join Date: Jan 2005
Location: Cape Town, South Africa
Posts: 83
SD clone aborts at startup

I am not able to startup from my Cloned drive (full backup). My HD has been on the sluggish side of late so I thought I'd zero erase it in case there were bad blocks, then copy my clone back to the HD.

I'm running 10.5.7 on my Intel iMac.

I'm using a Western Digital Studio drive (750 gb) and FW800. It's partitioned with Time Machine and SD, the later set for 298 GB or the same size as my Intel iMac. I have never had a problem booting from the SD clone.

My first step was to create a current backup of the clone. Used backup all files setting. All green at the end.

Next, I booted from my Leopard Installer, opened Disk Utility and erased/zeroed out the HD. New drive is set as a GUID partition. Next, I quit the Installer Disk. A startup Disk panel appeared. I selected the SD Clone, then restart. Computer started to boot. When the Apple gear appeared, screen went black and computer shut down.

I restarted holding the option key. Clone appeared in the Startup Launcher. Same sequence leading to a shut down.

Is there something I'm missing here? How can I get this drive to boot?

Appreciate any guidance. Thanks
__________________
2017 iMac 40 gb RAM; 2TB Fusion SSD (10.14.6)
MacBook Pro 15" 2.3ghz i7/ 16 gb RAM; 500GB SSD (11.1)

Western Digital My Passport Slim 1TB, USB 3.0 for MBP
Envoy Pro EX SSD - Thunderbolt 3 for iMac
Reply With Quote