Shirt Pocket Discussions

Shirt Pocket Discussions (http://www.shirt-pocket.com/forums/index.php)
-   General (http://www.shirt-pocket.com/forums/forumdisplay.php?f=6)
-   -   Super Duper problem, won't erase target drive (http://www.shirt-pocket.com/forums/showthread.php?t=831)

maxwell_photo 11-24-2005 12:36 AM

Super Duper problem, won't erase target drive
 
Hi

Looks like Super Duper is a Super product, but I'm having a problem you may be able to help me with.
I have two iMacs, iMac #2 and iMac #1, both running OSX 10.2.8. I need to copy the entire contants of the Hard drive on iMac #2 to iMac #1 and I downloaded the trial version of Super Duper per a recommendation on the Apple Support forum. So, I installed Super Duper on iMac #2, I started iMac #1 in the Firewire mode by holding down the "T" key on startup.

I connected iMac #1 to iMac #2 with a firewire cable and then the hard disk of iMac #1 appeared on the desktop of iMac #2. I started Super Duper and selected COPY "iMac#2hard disk" TO "iMac #1 hard disk" selecting the script "Backup All Files". When I clicked on "Start Copying" I enter my password and verify that I want to ersae the hard disk on iMac #1, I receive a error message that says, "An Error Occured While Erasing iMac#1 Hard Disk, do you want to see the log file. Here is a copy of the log file, any ideas to help me out on this....

[***] Wednesday, November 23, 2005 08:31:50 PM US/Pacific
|08:31:50 PM|Info| SuperDuper!, version 74, path: /Applications/SuperDuper!.app, OS: 10.2.8 (6R73)
|08:31:50 PM|Info| Source Drive: /, name: iMac 2 Hard Disk, device: /dev/disk0s9 type: hfs, OS: 10.2.8 (6R73), capacity: 19.15 GB, used: 16.47 GB, directories: 18371, files: 92432
|08:31:50 PM|Info| Target Drive: /Volumes/iMac 1 Hard Disk, name: iMac 1 Hard Disk, device: /dev/disk1s2 type: hfs, OS: 10.2.8 (6R73), capacity: 28.62 GB, used: 15.49 GB, directories: 18149, files: 87248
|08:31:50 PM|Info| Copy Mode : Erase, then copy files
|08:31:50 PM|Info| Copy Script : Backup - all files.dset
|08:31:50 PM|Info| Transcript : BuildTranscript.plist
|08:31:51 PM|Info| PHASE: Volume Preparation
|08:31:51 PM|Info| ...ACTION: Erase iMac 1 Hard Disk
|08:31:51 PM|Info| ......COMMAND => Erasing iMac 1 Hard Disk
|08:31:51 PM|Error| sh: grep: command not found

dnanian 11-24-2005 12:45 AM

The problem here is that your install of OS X is incomplete, and for some reason you're missing some of the basic Unix tools we need to operate. The only real solution is to archive-and-install Jaguar, then update back to 10.2.8 with Software Update.

Once that's done, SD! should work just fine.

maxwell_photo 11-24-2005 09:59 AM

Hi Dave

Thank you so much, I will do a re-install of Jaguar as you suggested, and take it from there, Thanks again for the help....

And just a quick question, will Shirt Pocket essentially do what I'm attempting, that is to copy ALL of the files and programs from one iMac to the other ??

Take Care

dnanian 11-24-2005 10:34 AM

Yes, it will... note, though, that copy protected/activated programs won't run without re-activation on the new system.


All times are GMT -4. The time now is 03:06 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.