Startup clone disk will not boot the system
I used SD to clone my system startup disk on a external SATA drive. The clone disk has a GUID partition scheme.
The Startup Disk utility in System Utilities sees both startup disks (the system and clone), but when I select the clone drive and press restart, it restarts from the system disk instead of the clone. I tried restarting and holding down the Option key; the only startup disk that shows up is the system disk. I have a new Mac Pro running 10.6. Any ideas appreciated. |
I'm guessing that your eSATA adapter doesn't support boot, actually.
|
I'm running the Newer Technology Voyager quad interface docking station. I unhooked the esata connection and hooked it up using USB. Same result: the clone shows up in the Startup Disk utility but is ignored, and doesn't show up at all during option-restart.
|
I don't think it's GUID, then -- or it's not a "Backup - all files" with "Erase, then copy" or "Smart Update"...
|
Dave,
Your initial post on this thread was correct: my eSATA adapter can't create or recognize a startup clone. When my external drive is connected via USB then I can create startup clones that I can then boot from. (My first experiment was trying to boot using USB from a clone created with eSATA; this failed and was the basis for my response to your first post.) Please briefly explain why making startup clones is a problem with an eSATA adapter. And thanks for putting me on the right track to solving this infuriating problem. Harlan |
Using eSATA to create the copy shouldn't have any effect, since the data on the disk is not specific to the adapter. I've certainly taken FireWire-created copies to Macs with only USB and started up, no problem (and vice versa - taking USB created copies on Power PC Macs and booting from FireWire).
|
All times are GMT -4. The time now is 05:33 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.